Copying; Copying Function; Common Copying Setting - Pantum PT16B2B Series User Manual

08

Copying

Copying function

Copying function
Common copying
ID copy
Receipt copying
• The collate and manual duplex copy are only supported by ADF models.
Note:

Common copying setting

Change relevant setting with "copying setting menu" for better copying effect.
1. Press "Copy" and then "Menu" on control panel to enter the "Menu Setting" interface.
2. Press "OK" to enter the "Copy Setting" interface.
3. Press "direction key to select option to be set and press "OK key" to set option.
Note: • Once the settings options for image quality, brightness and contrast, zoom, and paper size are
selected, the settings will remain in effect.
• For multipage, clone, poster, collated copy and manual dual-side setting, set recovery mode as
default setting after completing copying, switching panel key or restarting machine.
• After "multipage" and "clone function" are set, "paper dimension" supports "A4" and "Letter"
only.
Multipage
Clone
Poster
Collated copy
Manual dual-side
Image quality
Intensity
Resizing
Paper setting
Arrangement mode
Intensity
Paper Size
Intensity
Paper Size
Instructions
Print a multi-page document to a piece of paper.
Print several identical images to a piece of paper.
Print a one-page original to pieces of paper.
Collate copies of an original.
It supports manual duplex copying for originals.
Set the definition mode to improve the copying effect.
Adjust deep-light copying effect by setting intensity.
Reduce or enlarge the size of image copied.
Set the paper size and type.
Set the Layout for Copying ID Card
Adjust deep-light copying effect by setting intensity.
Set the paper size.
Adjust deep-light copying effect by setting intensity.
Set the paper size.
19