Table of Contents
Advertisement
3-1-10 Separation of ASSY PDP MODULE P-X MAIN BOARD
Part Name
Flat able ① Detach all Connectors from the X Main Board.
※ To separate the Flat Cable of the X-Board, press the
upper and the lower sides of the connector.
: Pinch the sides, but then push down in the ribbon, it
!
should slide out after that.
X-Main
① Remove 7 screws.
Board
: PH,+,WWP,M3,L8,NI PLT
② Remove the X-Main Board.
X-Main
① Remove the X-Main Board.
Board
Samsung Electronics
Description
Disassembly & Reassembly
Description Photo
3-5
Advertisement
Table of Contents
