Chapter 3: Bios And Raid Support; Knowing Uefi Bios - Asus TUF GAMING Z790-BTF WIFI Manual

Table of Contents

Advertisement

Chapter 3:
BIOS and RAID Support
BIOS and RAID Support
For more details on BIOS and RAID configurations, please refer to Manual & Document
under the Support tab of the product information site, or visit
https://www.asus.com/support.
3.1

Knowing UEFI BIOS

BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot
device configuration that are needed for system startup in the motherboard CMOS. In
normal circumstances, the default BIOS settings apply to most conditions to ensure
optimal performance. DO NOT change the default BIOS settings except in the following
circumstances:
An error message appears on the screen during the system bootup and requests you
to run the BIOS Setup.
You have installed a new system component that requires further BIOS settings or
update.
Inappropriate BIOS settings may result to instability or boot failure. We strongly
recommend that you change the BIOS settings only with the help of a trained
service personnel.
BIOS settings and options may vary due to different BIOS release versions. Please refer
to the latest BIOS version for settings and options.
Entering BIOS at startup
To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test
(POST). If you do not press <Delete> or <F2>, POST continues with its routines.
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press the <F5> hotkey.
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value.
The BIOS setup program does not support Bluetooth devices.
BIOS menu screen
The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from Setup Mode in Boot menu or by pressing the <F7> hotkey.
Motherboard User Manual
3
3-1

Advertisement

Table of Contents
loading

Table of Contents