Hanging The - X10 SoundPower VK59A Owner's Manual

C C C C C X10 H X10 H C C C C C
X10 H X10 H X10 H
HANGING HANGING

HANGING THE

THE THE THE OUSE OUSE OUSE
HANGING HANGING THE OUSE OUSE
The UR78A Remote defaults to House Code A, and in most cases you
will not need to change this unless you are experiencing interference
from a neighboring X10 system.
1 . 1 . Press and release the X10 button. 1 . 1 . 1 .
2 . 2 . Press and hold SETUP until the LED 2 . 2 . 2 .
indicator lights steadily. Release the
Setup button.
3 . 3 . 3 . 3 . 3 . Use the number buttons to enter the
number equivalent to the chosen House
Code (1=A, 2=B ..16=P).
4 . 4 . 4 . 4 . 4 . Press the ENTER button to confirm the House
Code. The LED turns off.
Note: The House Code you choose must
match the House Code on the Transceiver
and Modules you are using it with.
2 2 2 2
2 2 2 2 2 2
ODE ODE ODE
ODE ODE
C C C C C
ONTROLLING ONTROLLING ONTROLLING A N A N OPTIONAL A N A N OPTIONAL OPTIONAL OPTIONAL
ONTROLLING ONTROLLING A N OPTIONAL
IR M IR M IR M IR M IR M C C C C C (IR543) (IR543) (IR543) (IR543) (IR543)
I N I I N I I N I I N I I N I ONTROLLER ONTROLLER ONTROLLER ONTROLLER ONTROLLER
If you already own an IR Mini Controller, Model IR543, you will need
to change the X10 Home Automation code in the UR78A remote to
use it. The code for standard X10 RF Home Automation is 999. The
code to control the IR Mini Controller is 998. To change the code:
1 . 1 . 1 . 1 . 1 . Press and hold
SETUP until the LED
indicator lights
steadily. Release the
SETUP button.
Note: In most cases, you will not need to use the IR Mini Controller to
receive commands from the UR78A Remote - the RF Transceiver
Module does this for you and has the added advantage of working
through walls. You can if you wish control the IR Mini Controller and
the Transceiver Module at the same time. To do this store code 999
under the X10 key and store 998 under any other key (except TV).
See page 27 for more info on using an IR543.
2 3 2 3
2 3 2 3 2 3
2 . 2 . Press and release 2 . 2 .
2 .
the X10 button.
3 . 3 . Enter 998 to control 3 . 3 . 3 .
an IR543, IR Mini
Controller, or 999
for standard X10
control. The LED
turns off after the last
digit entered.