Table of Contents
Advertisement
Using the Mouse
11-3
The MREADME.DOC file
The program disk containing the mouse files may in-
clude a file named MREADME.DOC. You should read
this file for additional information that became avail-
able after this book was printed.
eg
To read this file on your screen:
1. Start your computer.
2.
Insert the distribution disk that contains the mouse
files into drive A.
3. At the system prompt, type:
type
atmreadme-doc
Installing the mouse
There are three versions of the mouse to accommodate
different systems and configurations. The remainder of
this section provides instructions for installing each
type of mouse. Read only the instructions for installing
the type of mouse you have.
Connecting the 9-pin serial mouse
>
To connect the 9-pin serial mouse to your computer:
1. Turn your computer off.
2. Locate an available 9-pin serial port on the back of
your computer (this port may be oriented either
vertically or horizontally).
3. Insert the serial connector into the serial port and
then tighten the screws on the serial connector.
4. Turn on your computer.
Advertisement
Chapters
Table of Contents
