Advertisement
UPGRADE FIRMWARE-6
Download procedures
5. Check that the connection of PC with Unit.
7. Turn ON the power supply switch of the unit.
6. Check that unit is in the state of NO DISC.
8. Press the Enter key of PC.
9. Press the Enter button, after inputting MO by the keyboard of PC.
10. Press ENTER button, after inputting SZL by the keyboard of PC.
FL Display
ROM ERASE
The file(b1bk1138.sz0) specified by the
command line is used in this program.
The program is checking the circuit.
The program starts transmission of the data to unit.
LOADING
www.denom.com
DSR-7.3
Advertisement
