Download Print this page
Sub-Zero 315I Planning Information

Sub-Zero 315I Planning Information

Wolf sub-zero 315i ice makers: specifications
Hide thumbs Also See for 315I:

Advertisement

Quick Links

Planning Information
Undercounter Model 315 l ( P)
Ice Maker
Automatic ice maker
Water reservoir
Large ice storage
capacity
Model 315I
Serial and model
number plate
Front venting with
removable kickplate
Model 315IP
Drain Pump
A
side from the full-size units,
Sub-Zero offers in its Built-In and
Integrated lines of refrigeration, we
round out our product line-up with
a line of traditional undercounter
refrigeration which meets all of the
exacting standards you have
grown to expect from Sub-Zero.
This beautifully crafted automatic
ice maker is the only unit Sub-Zero
offers that has the capability of
providing clear ice. The ice is not
crescent shaped, but instead
resembles a small barrel.
Keep in mind that special plumbing
requirements are necessary to
install and have this unit function
properly.
Dimensions in parentheses are in
millimeters unless otherwise specified.
11/06
M O D E L 3 1 5 I ( P )
Undercounter ice maker
Model 315I has a gravity drain, while Model 315IP has
a built-in pump to allow water to drain into adjacent
sink
24" (610) depth-true design for a complete integrated
look
Door accepts custom panels
Automatic ice maker provides high-quality, clear ice
Ice storage capacity of up to 26 lbs (12 kg)
Automatic defrost
Reversible door swing
Front venting with removable kickplate allows unit to be
serviced from the front
Solid core door with magnetic gasket and door closer
UL approved for US and Canada
Two, five and twelve year residential warranty—
exclusions apply; warranty information can be found on
our website, subzero.com
Reversible door
hinge
Ice scoop
Four-sided
magnetic gasket
Adjustable ice maker
control
1

Advertisement

loading

Summary of Contents for Sub-Zero 315I

  • Page 1 M O D E L 3 1 5 I ( P ) Undercounter ice maker Model 315I has a gravity drain, while Model 315IP has a built-in pump to allow water to drain into adjacent sink 24" (610) depth-true design for a complete integrated...
  • Page 2 Dimensions may vary by ± " (3). Dimensions in parentheses are in millimeters unless otherwise specified. S P E C I F I C A T I O N S Model 315I(P) Overall Width Overall Height Overall Depth Ice Storage Capacity...
  • Page 3: Top View

    Planning Information Undercounter Model 315 l ( P) M O D E L 3 1 5 I – G R A V I T Y D R A I N " WATER INLET TUBE WATER DRAIN FILTER TUBE 24" (610) LOCATE DRAIN WITHIN 2"...
  • Page 4 This ice maker unit can be ordered with a pump (Model 315IP) or without a pump (Model 315I). Models without a drain pump, drain their water by gravity. However, gravity drain models may be converted to pump models through the installation of a drain pump kit and drain pump.
  • Page 5 D O O R P A N E L It is important to understand the differences in mounting any wood panel to Model 315I(P). The panel must be (16) minimum thickness. Refer to the installation instruc- tions packaged with the unit to understand how the panel is installed.

This manual is also suitable for:

315ip