Philips VR455 Manual page 5

| " Poi
p ry te
Remote Control Transmitter
TEPCATA MITE VCOPCATR
0 Cc)
10 11 12
20
21
22 23
24
25
26 2f 28 29 30
3f
10 SLOW Button
Press during SP or SLP playback to view a slow-motion
picture.
11 STOP Button
Press to stop the tape.
12 PAUSE/STILL Button
¢ Press once to temporarily stop the tape during
recording (Pause).
¢ Press once to freeze the tape picture during playback
(Still).
¢ Press again when you want to resume normal
playback or recording.
13 VCR CH(annel) UP/DOWN Buttons
Press "A" or " V" to scan up or down through the
VCR's channels. Release at desired channel.
14 NUMBER Buttons
~ (0,1, 2, 3, 4, 5, 6, 7, 8 and 9)
Use for channel selection, on-screen menu selection,
clock setting, program setting, etc. For selecting channels
1 to 9, first press "O" button and then press "1" to "9."
(100)
Press this button first when selecting channels 100 and
higher.
15 MENU Button
Press to call up the on-screen menu display.
16 JOG/SHUTTLE Button
Press to use the Jog Dial or the Shuttle Ring.
17 STATUS Button
Press this button to display the time counter, time,
function, and channel number.
18 CLEAR Button
¢ To erase incorrect or unwanted data in on-screen
menu operation.
¢ To reset the tape counter. "0:00:00" will appear on the
TV screen. ;
19 Jog/Shuttle Light
Lights up when the JOG/SHUTTLE button is pressed.
20 Jog Dial
Turn this dial while in the Still mode clockwise for jog
control. The tape moves forward frame-by-frame at the
speed with which the dial is turned.
21 Shuttle Ring
Tur this ring while in the Play or Still mode in either
direction.
The farther the ring is rotated, the faster the search speed.
Releasing the ring stops the picture in the Still mode.
22 VAR(iable) SLOW Buttons
During the slow mode, the speed can be varied from
about 1/6 to about 1/30 of normal speed with the
VAR(able) SLOW button.
23 REC(ord)/OTR Button
Press to start recording.
24 TRACKING Buttons
In the Play and Slow modes, when playing a tape, press
TRACKING "A" or "V" button to adjust the tracking.
25 GO-TO Button
This button can make search easier by allowing you to
skip back or ahead on a tape. Press this button and select
desired counter number with NUMBER buttons,
followed by PLAY/STOP button.
26 Tape SPEED Button
Press to select recording speed (SP, SLP). In playback,
the tape speed is automatically selected (SP, LP, SLP).
27 F(rame) ADV(avance) Button
Press this button while in the Still mode to advance the
picrture one frame at a time (Frame Advance).
28 X2 Play Button
Press during playback mode to view a tape at 2 times
normal playback speed.
29 VCR/TV Button
Press to select the signal source that your TV receives.
TV position
(VCR indicator on the display panel : OFF)
To watch TV or to warch one program while recording
another.
VCR position
(VCR indicator on the display panel : ON)
To watch a tape, monitor a recording, or watch a TV
broadcast selected with VCR's channel selector.
30 MEMORY Button
Press to memorize the tape position at which the counter
was reset to "0:00:00."
31 EJECT Button
Press to eject the cassette.