Philips VR455 Manual page 15

ch record while you're away, follow steps 1-12 below. For each program you set, the VCR will turn itself on, do the
recording, and turn off automatically. You can store up to eight programs. Instructions for each step appear on the TV screen
after you begin. You must use your remote control.
Make sure ...
¢ the steps in "Hook Up Your VCR" have been
completed, an antenna or cable system is connected to
the VCR, and the VCR and TV are turned on.
¢ CABLE or NORMAL has been selected and channels
have been programmed into the VCR's memory. See
"Turn On Your VCR" and "Adding/Deleting a
Channel"',
¢ the TV/VCR selector is set to "VCR."
VCR
_
F F B OBB we fess
NUMBER
Buttons
MENU Button
CLEAR Button
PHILIPS
Remote Control
To Make Corrections...
Press the CLEAR button while the screen
you wish to change is displayed. This
moves the flashing indicator to the number
you want to change. Now, enter the correct
number. You may have to press the
CLEAR button more than once to reach
the numbers you want to change.
¢ the clock is set to the correct time.
¢ a cassette tape is inserted in the VCR and the record
tab is in place on the cassette.
¢ the tape is long enough to record the programs.
FOR EACH STEP BELOW, YOU HAVE 60 SECONDS
TO COMPLETE IT. IF YOU DON'T, PROGRAMMING
WILL HAVE TO BE RESTARTED FROM STEP 1.
TO SELECT PUSH NO, SHOWN
Select the Menu Screen
Press the MENU button on the remote control.
The main menu screen at right will appear.
1 PROGRAM
2 VCR SETUP
3 TUNER SET UP
4 INPUT SELECT
§ CLOCK SET
TO END PUSH MENU
Select the Program Mode
Press the NUMBER 1 button on the remote control to select the
Program mode.
Remember, use the NUMBER buttons on your remote control.
Select Normal, Daily or Weekly Recording
e TO SELECT PUSH NO, SHOWIN
Normal Recording
Press the 1 button to record a TV show on any
day you choose up to 12 months away.
Or
1 ONCE
2 DAILY
3 WEEKLY
4 PROGRAM REVIEW
Daily Recording
Press the 2 button to record a TV show every
day (Monday through Friday) at the same time
and length.
TO END PUSH MENU
DAILY PROGRAM, (MON-FRI)
NAVGTDL ES?
PROGRAM=123456758~
ETE
Or
Weekly Recording SELECT PROGRAM NUMBER
TO END PUSH MENU
Press the 3 button to record a TV show once a
° WEEKLY PROGRAM
week at the same day, time, and length. SVUUEEEE
BnUGIN e> pees &=
Select the Position
SELEGT PROGRAM
TO END PUSH MENU
Press the NUMBER buttons 1-8 to select one of the 8 positions to
store a timer record program. The flashing numbers indicate an open
position where a program can be stored.
¢ If you select a position number that has
already been set, "PREVIOUSLY SET
PROGRAM" appears for a few seconds,
then the position contents will be displayed.
If this happens, press the MENU button
twice and start over.
PREVIOUSLY SET PROGRAM
Select the Channel
Enter two numbers for the TV channel. For
channels above 100, press the 100 button, then
two numbers for the channel.
For example, for channel 10, press NUMBER
button 1, then 0. Or, for channel 115, press 100,
then press 1 and 5. To record from line input,
press 0 and 0. "A/V IN" will appear on the screen.
(Continued on next page.)