Philips VR455 Manual page 25

Remote Control
VCR can't be remote controlled...
Miscellaneous
You can't view programs normally on the TV...
Video cassette can't be inserted...
Video cassette can't be removed...
Video cassette ejects when the OTR or RECORD button is
pressed, or when the POWER button is pressed off to set the
Timer...
Correction
¢ Aim the Remote Control directly at the remote sensor on
the VCR.
¢ Avoid all obstacles which may interfere with the signal
path.
¢ Inspect or replace the batteries (P.6).
¢ Make sure batteries are inserted correctly (P.6).
Correction
« Set the VCR/TV selector to "TV".
¢ Insert the cassette with the window side up and the record
tab facing you.
¢ Make sure a cassette tape is not already inserted. Press
STOP/EJECT button on VCR.
¢ Check that the power cord is correctly connected to an AC
(Alternating Current) outlet.
e Check the cassette to be sure that the record tab on the
back of the cassette is still intact (P.6).
Video Recording System _ Rotary four-head helical scan
system
Video Signal EIA standards: NTSC color
Antenna VHF/UHF —75 ohm extemal
antenna terminal
VHF Output Signal Channel 3 or 4 (switchable) 75
ohms unbalanced
Power Requirement AC110V — 127V —220V ~
50/60 Hz
Power Consumption 19W
Operating Temperature 41°F (5°C) to 104°F (40°C) ©
Relative Humidity 10% to 80%
Design and specifications are subject to change without notice.
Weight 3.8 kg
Dimensions 360(W) x 94(—) x 295(D) mm
Tuner
Broadcast Channels VHF 2 — 13, UHF 14-69
CATV Channels Midband A-I
Superband J-W
Hyperband AA — EEE
Lowband A5-AIl
Special channel 5A
Ultraband 65 — 125
Accessories ¢ Wireless Remote Control
- "AAA" Batteries
¢ RF Coaxial Cable
¢ Conversion plug
cr eee ek