Download Print this page

NatureWater SOFT-HB1B Operating Instructions Manual

Water softening unit

Advertisement

Quick Links

Operating instructions
Water Softening Unit SOFT-HB1B
63922, 63923
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

Advertisement

loading

Summary of Contents for NatureWater SOFT-HB1B

  • Page 1 Operating instructions Water Softening Unit SOFT-HB1B 63922, 63923 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
  • Page 2 To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods. Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler – Germany E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.naturewater.eu Item 63922, 63923 Page 2 11 2023-1...
  • Page 3 3 m in length between the outlet of the softener and the inlet of the hot water boiler. If the 3-m connection line cannot be assured, it is recommended to install a non-return valve between the water softener and the hot water boiler. https://www.naturewater.eu Item 63922, 63923 Page 3...
  • Page 4 Do not apply force to the machine and avoid direct sunlight and exposure to heat from other sources. Technical specifications Model name SOFT-V1 SOFT-V2 Power supply 230 V/50 Hz Power consumption (W) Pressure (bar) 1.5–4.5 Flow rate ( ⁄ 1500 3000 ℓ Max. temperature (℃) Min. temperature (℃) https://www.naturewater.eu Item 63922, 63923 Page 4 11 2023-1...
  • Page 5 Overview № Name № Name Inlet/outlet Belt Relief valve Overflow fitting LCD display Brine tank and valve Control panel Housing Top cover FRP tank Cover Central pipe https://www.naturewater.eu Item 63922, 63923 Page 5 11 2023-1...
  • Page 6 (factory- set to 2 a.m.). • The control system can calculate and design an economical and effective soft-water treatment scheme according to the actual water supply and water consumption of the users. https://www.naturewater.eu Item 63922, 63923 Page 6 11 2023-1...
  • Page 7 At the same time, the outlet pressure of the booster pump must not exceed 4.5 bar, otherwise a pressure-reducing valve must be installed between the booster pump and the water softener. https://www.naturewater.eu Item 63922, 63923 Page 7...
  • Page 8 • It is forbidden to combine the overflow and drain pipes in one pipe and insert it into the waste- water outlet. https://www.naturewater.eu Item 63922, 63923 Page 8 11 2023-1...
  • Page 9 2. Connect the bypass pipe connection to the water inlet and outlet. № Name № Name Clamp (fixed water pipe) Inlet pipe Connection point Inlet pipe Outlet O-ring Outlet pipe 2 points https://www.naturewater.eu Item 63922, 63923 Page 9 11 2023-1...
  • Page 10 Connecting table of control panel Drain pipe Drain pipe Clamp (loosen, install, re-tighten) Overflow pipe Clamp (loosen, install, re-tighten) Clamp Overflow pipe Ground Clamp (loosen and fit) Drain opening Overflow opening Clamp (loosen and fit) https://www.naturewater.eu Item 63922, 63923 Page 10 11 2023-1...
  • Page 11 Note! Please check whether the large insert on the bypass valve is inserted all the way to the bottom. Check that the sealing rings on the two bypass pipe connections are correctly installed. https://www.naturewater.eu Item 63922, 63923 Page 11 11 2023-1...
  • Page 12 Note! Make sure that the large clip on the bypass valve is inserted all the way to the end. Ensure that the seals on the two bypass pipe connections are properly installed. https://www.naturewater.eu Item 63922, 63923 Page 12 11 2023-1...
  • Page 13 Once the fault or problem has been rectified, set the bypass valve to the operating position (push the pull rod to the position shown in Fig. 2) to restore the soft water supply. https://www.naturewater.eu Item 63922, 63923 Page 13...
  • Page 14 Name № Name With water-mixing feature Without mixing feature Water-mixing regulator Water-mixing plug Clockwise rotation 9. The general installation scheme is divided into two installation methods (as shown in the figures below). https://www.naturewater.eu Item 63922, 63923 Page 14 11 2023-1...
  • Page 15 This procedure is intended to ensure that the hose is not pushed away or pushed out of the sewer if the flat is connected to the sewer or the water pressure of the floor drain is high). https://www.naturewater.eu Item 63922, 63923 Page 15...
  • Page 16 Open the lid and pour a sufficient amount of soaked salt into the brine container. The salt in the brine tank must be above the water level. As a rule, the salt should exceed the level of the water in the brine tank and salt particles should always be visible. https://www.naturewater.eu Item 63922, 63923 Page 16...
  • Page 17 During this process, the water and elec- tricity must not be switched off and no buttons must be pressed. 6. First use After 5 min of drawing water from the tap, the softened water can be used normally. https://www.naturewater.eu Item 63922, 63923 Page 17 11 2023-1...
  • Page 18 The background mode is set by the manu- facturer at the factory, e.g., backwash, brine and slow rinse, refill, quick rinse, wash time, etc. № Name № Name Menu/confirm Up button Manual/cancel Down button https://www.naturewater.eu Item 63922, 63923 Page 18 11 2023-1...
  • Page 19 In the parameter settings menu, press and hold or move up or down to change the individual parameter values. • Press the Up and Down buttons simultaneously for 5 s to cancel the button lock. https://www.naturewater.eu Item 63922, 63923 Page 19 11 2023-1...
  • Page 20 Brine and slow rinse 0–99 Minutes time SOFT-V2 SOFT-V1 Brine refill time 0–99 Minutes SOFT-V2 SOFT-V1 Quick-rinse time 0–99 Minutes SOFT-V2 SOFT-V1 12.5 Resin volume 5–75 Litres SOFT-V2 Water hardness 50–800 ⁄ ℓ https://www.naturewater.eu Item 63922, 63923 Page 20 11 2023-1...
  • Page 21 If a possible power failure lasts more than 3 days, the menu shown in Fig. K is displayed. It serves as a reminder to adjust the time. • Operation process: water supply → backwash → brine and slow rinse → fast rinse → add brine → water supply https://www.naturewater.eu Item 63922, 63923 Page 21 11 2023-1...
  • Page 22 “Raw water hardness setting” (to determine the raw water hard- ness, see the “Water hardness and testing” section). Once the water softener has been installed, the three parameters shown above must be set. https://www.naturewater.eu Item 63922, 63923 Page 22...
  • Page 23 The hardness expressed by the CaCO₃ content can be roughly divided into Degree of hardness Description 0–75 Very soft water 75–150 Soft water 150–300 Middle-hard water 300–450 Hard water 450–700 Very hard water 700–1000 Super-hard water > 1000 Extra-hard water https://www.naturewater.eu Item 63922, 63923 Page 23 11 2023-1...
  • Page 24 During normal use, the user does not need to carry out any further work on the softener, but simply needs to add a certain amount of salt to the brine tank at regular intervals. https://www.naturewater.eu Item 63922, 63923 Page 24...
  • Page 25: Troubleshooting Table

    2. Brine tank does not have 2. Ensure that brine tank is suffi- enough salt ciently filled with salt. 3. Obstruction of injector 3. Remove and clean injector. https://www.naturewater.eu Item 63922, 63923 Page 25 11 2023-1...
  • Page 26 2. Foreign objects influence con- 2. Clean control valve. trol valve Note! The above solutions are for reference only. If the machine breaks down, please call in professional technicians to solve the problem. https://www.naturewater.eu Item 63922, 63923 Page 26 11 2023-1...
  • Page 27 WilTec Wildanger Technik GmbH Königsbenden 12 / 28 52249 Eschweiler Germany Important note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. https://www.naturewater.eu Item 63922, 63923 Page 27 11 2023-1...

This manual is also suitable for:

6392263923