Table of Contents
Advertisement
SU-X920D
SU-X920D
Type A... The fan motor terminal is a connector type.
The "mark ®"" is printed on the main P.C.B. of type A. (Refer to the diagram below.)
Connection diagrams shown are for connections to a
ey
REMOTE;
Turntable
Technics histi component system.
:
Type B...The fan motor terminal is a lead wire type.
SYNCHR
Make: conriactions:in the numbered sequential order
'
Refer to the diagram below to distinguish type A from type B.
a
Connect the stereo connection cables
r
(included with the turntabie, tuner, stereo sound pro-
Type (A)
Type (B)
cessor, and cassette tape deck),
Stereo connection cable
Rear Panet
Rear Panel
'1-1
wey
"GND" terminal of the amplifier
This terminal is for use with a turntable which has a
ground wire.
1-2
:
Connection Via
Lead Wires
Connector
"EXT" terminals of the amplifier
When these terminals are not in use, be sure to in-
sert the "shorting" pins (included).
OUT
EXT
iN
Direct Connection
Via Connector
Main P.C.B.
Connector
Main P.C.B.
Shorting pins
Screw
[2] Connect the L-type cable (included with the
turntable, tuner, stereo sound processor, compact
disc player, and cassette tape deck),
(2-4)
(Side View)
(Side View)
"REMOTE OUT" terminal
é
This terminal is used to connect to the "REMOTE
IN" terminal of the Technics multi-compact disc
player (not included).
Main
221
P.C.B.
"CONTROL" terminal
Make a connection from this terminal to the "CON-
TROL" terminal tor a cassette deck on a Technics
multi compact disc player.
(For detailed information, refer to the operating in-
structions
of
the
Technics
multi
compact
disc
player.)
the amplifier
:
These terminals are protected by the dust-protec-
tion caps to avoid damage by the dust, etc.
Remove the caps only when the "DIGITAL IN" ter-
minais are to be used.
When these terminals are not being used, attach the
caps as shown in the illustration below.
Stereo sound
rocess:
P
The mark @®
is printed.
Bs
ee Motor )
Ass'y
LINE OUT®
<
"f DIGITAL
iT
OUT out
Dust-protection
cap
22
@ Connect the AC power supply cords and
AC outlet
See page 3 of service manual RS-X920, Order No.
AD9203069A2.
Advertisement
Table of Contents
