Page 2
Dear Customer, Please read this manual before using the product. Thank you for choosing this product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state of the art tech- nology.
The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.smeg.com/services/customer-service Refrigerator / User Guide 2 /26 EN...
Safety Instructions • This section includes the safety or terraces. Exposing the product to rain, snow, sunlight and wind may cause risk of fire. instructions necessary to prevent the risk of personal injury or material 1.2 Safety of children, damage. vulnerable persons and pets • Our company shall not be held • This product may be used by children...
Safety instructions 1.3 Electrical safety 1.5 Installation Safety • The product shall not be plugged • Contact the Authorized Service into the outlet during installation, for the product’s installation. To maintenance, cleaning, repair, and prepare the product for installation, transportation operations. see the information in the user • If the power the cord is damaged, it guide and make sure the electric...
Safety instructions • Do not connect your refrigerator to power sav- of refrigerant. The amount of the ing devices. These systems are harmful for the refrigerant available in your product product. is specified in the Type Label. • The installation place of the product 1.6 Operational safety shall not be exposed to direct • Do not use chemical solvents on the product.
Safety instructions the refrigerator. Risk of fire and • Do not hit or exert excessive pressure explosion! on glass surfaces. Broken glass • Do not store explosive materials may cause injuries and/or material such as aerosol cans with flammable damages. materials inside the product.
Safety instructions Steam contacts the live areas in your refrigerator and causes short circuit or electric shock! • Take care to keep water away from the electronic circuits or lighting of the product. • Use a clean, dry cloth to wipe the dust or foreign material on the tips of the plugs.
Environmental instructions 2.1 Compliance with the WEEE Directive and Disposing of the Waste Product: This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equip- ment (WEEE). This symbol indicates that this product shall not be disposed with other house- hold wastes at the end of its service life.
Installation 4.1 The right place for installation • The product requires adequate air circulation to function efficiently. If the product will be placed Read the “Safety Instructions” section first! in an alcove, remember to leave at least 5 cm distance between the product and the ceiling and the walls.
Installation In order to adjust the doors vertically, 4.4 Adjustment of the feet •Loosen the fixing nut at the bottom If the product is not in balanced position, adjust the •Screw adjusting nut (CW/CCW) according to the front adjustable stands by rotating right or left. position of the door •Tighten the fixing nut for the final position In order to adjust the doors horizontally, • Loosen the fixing screw at the bottom • Loosen the fixing bolt on the top • Screw the adjusting bolt (CW/CCW) on the side...
Installation 4.5 Electrical connection WARNING: Do not use extension or multi sockets in power connection. WARNING: Damaged power cable must be replaced by Authorized Service. • Our firm will not assume responsibility for any damages due to usage without earthing and power connection in compliance with national regulations.
Preparation 5.2 First operation Read the “Safety Instructions” section first! Before using your refrigerator, make sure the necessary preparations are made in line with the instructions in "Safety and environment 5.1 What to do for energy saving instructions" and "Installation" sections. mehmet • Keep the product running without placing any Connecting the product to electronic...
Preparation 5.3 Hints and Tips • To prevent food waste the new stock of food should always be placed behind the old one. Hints for energy saving Hints for food refrigeration • Most efficient use of energy is ensured in the configuration with the drawers in the bottom • Meat (all types): wrap in a suitable packaging part of the appliance and shelves evenly and place it on the glass shelf above the distributed.
Operating the Product Read the “Safety Instructions” section first! • Do not use any mechanical tools or any other tools than the recommendations of the manufacturer to speed up the thawing operation. • Do not use parts of your refrigerator such as the door or drawers as a support or a step.
Operation of the Product Read the “Safety Instructions” section first! 6.2 Indicator panel Indicator panels may vary depending on the model of your product. Audial and visual functions of the indicator panel will assist in using the refrigerator. 1. Key lock 2.
Page 18
Using the product 1.Key lock Pressing this key will enable the cooling compartment temperature to be set at 8,7,6,5,4,3,2 When the key lock key is pressed for 3 seconds, the key lock is activated and the LED on the key is and 1 Celcius.
Using the product 6.3 Deodoriser Module 6.5 Humidity controlled crisper *May not be available in all models *May not be available in all models Thanks to the humidity controlled crisper, The deodoriser module quickly eliminates the bad vegetables and fruits may be stored for a longer smells in your refrigerator before they permeate the period at an environment with ideal humidity surfaces.
Using the product 6.10 Icematic and ice storage box 6.6 Dairy (cold storage) bin *May not be available in all models *May not be available in all models Fill the icematic with water and put in place. The “The dairy (cold storage) bin ” provides lower ice will be ready after approximately two hours.
Using the product 6.11 Freezing fresh food • Mark each food pack by writing the date on the package before freezing.This will allow you to • To preserve food quality, the food items placed determine the freshness of each pack every in the freezer compartment must be frozen as time the freezer is opened.
Using the product Boil the vegetables and filter the water to extend the frozen storage time. Place the food in air-tight packages after filtering and place in the freezer. Bananas, tomatoes, lettuce, celery, boiled eggs, potatoes and similar food items should not be frozen.
Maintenance and cleaning • To clean all removable components WARNING: Read the “Safety during the cleaning of the interior surface of Instructions” section first! the product, wash these components with a mild solution consisting of soap, water and carbonate. Wash and dry thoroughly. Prevent WARNING: Unplug the refrigerator contact of water with illumination components...
Maintenance and cleaning A tempering process is applied to increase the resistance of these glasses against impacts and breakage. As an additional safety precaution, a safety film has been applied to the rear surface of these glasses to prevent harm to the environment in case it breaks.
Troubleshooting Check this list before contacting the service. Doing • In case of sudden power failure or pulling so will save you time and money. This list includes the power plug off and putting back on, the frequent complaints that are not related to faulty gas pressure in the product's cooling system workmanship or materials.
Page 26
Troubleshooting The food items kept in cooler compartment • The new product may be larger than the drawers are frozen. previous one. Larger products will run for longer periods. • The cooler compartment temperature is • The room temperature may be high. >>> set to a very low degree.
Page 27
Troubleshooting There is sound of wind blowing coming from • The food items may be in contact with the the product. upper section of the drawer. >>> Reorganize the • The product uses a fan for the cooling food items in the drawer. process.
Page 28
TECHNICAL DATA The technical information is situated in the rating plate on the internal side of the appliance and on the energy label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database.