Table of Contents
Advertisement
en Cleaning and servicing
Insert the pump cap.
4.
Screw the pump cap as far as it
5.
will go.
The handle on the pump cap must
be in a vertical position.
44
Insert and close the service flap.
6.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run a suitable programme
for draining after you have emptied
the drain pump.
Open the water tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into the
4.
manual dosing compartment.
Select a suitable programme for
5.
draining.
→ "Programmes", Page 26
Advertisement
Table of Contents
