Blue Indicator Lights; Gray Indicator Lights - Jeep GRAND CHEROKEE 4xe 2023 Owner's Manual

128 GETTING TO KNOW YOUR INSTRUMENT PANEL
Selec-Speed Control Indicator Light —
If Equipped
This light will turn on when Selec-Speed
Control is activated.
To activate Selec-Speed Control, assure the
vehicle is 4WD Low and push the button on the
Instrument Panel.
NOTE:
If the vehicle is not in 4WD Low, "To Enter
Selec-Speed Shift to 4WD Low" will appear in the
instrument cluster display.
Max Regeneration Indicator Light
This indicator light will illuminate to
indicate that Max Regeneration is on and
not ready.
When the switch is pressed, the following
instrument cluster messages will be seen:
"Max Regeneration On" – appears when the

feature is turned on.
"Max Regeneration Off" – appears when the

feature is turned off.
"Max Regeneration Unavailable" – appears

when the feature is requested, but the vehicle is
unable to comply. LED will flash for five seconds
to indicate unavailability Ú page 20.
Electric Mode Indicator Light
This light alerts the driver that the Electric
mode is currently active.
Hybrid Mode Indicator Light
This light alerts the driver that the Hybrid
mode is currently active.
e-Save Indicator Light
This light alerts the driver that the e-Save
mode is currently active.
B I L
LUE NDICATOR IGHTS
High Beam Indicator Light
This indicator light will illuminate to
indicate that the high beam headlights
are on. With the low beams activated,
push the multifunction lever forward
(toward the front of the vehicle) to turn on the high
beams. Pull the multifunction lever rearward
(toward the rear of the vehicle) to turn off the high
beams. If the high beams are off, pull the lever
toward you for a temporary high beam on,
"flash to pass" scenario.
G I L
RAY NDICATOR IGHTS
Night Vision Suppressed Indicator Light —
If Equipped
This light alerts the driver that the
Night Vision Warning System status is
Suppressed Ú page 186.