Table of Contents
Advertisement
Pintucking
The complete pin-tucking attachment comprises the following members:
3 double needles for pin-tucks of approx. Vu, '/« and '/« inch width
3 pin-tuckers with 3, 5 and 7 grooves
Pig. 72
1 pin-tucking tongue
1
pin-tucking yarn threader
When
preparing
the
machine
for
pin-tucking,
proceed as follows:
1. Set needle to centre position in hole by ad¬
justing control 13 (Fig. 2) to centre.
2. Set zigzag lever 12 (Fig. 2) to zero.
3. Remove standard needle from needle bar and
insert a double needle (proceed as lor standard
needle).
4. Attach the pin-tucking foot corresponding to
the needle distance, namely:
pin-tucker with 7 grooves / double needle of '/i*"
pin-tucker with 5 grooves / double needle of ' V
pin-tucker with 3 grooves / double needle of
!(2
4
Thread tension
7
Tako-up lever
8
Thread guide
21
Spool pins
22
Thread guide
33
Thread guide
Fig. 73
Advertisement
Table of Contents
