Advertisement
Quick Links
Entain Kiosk
Quick Start Guide
Part# 15502-GA0xx
NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173
Telephone 03 9701 1511
www.neoproductsgroup.com
15502-ML002 Rev01_ECN 6481_ENTAIN QUICK START GUIDE
Page 1 of 8
Advertisement
Related Manuals for NEO 15502-GA0 Series
Summary of Contents for NEO 15502-GA0 Series
- Page 1 Entain Kiosk Quick Start Guide Part# 15502-GA0xx NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15502-ML002 Rev01_ECN 6481_ENTAIN QUICK START GUIDE Page 1 of 8...
-
Page 2: Component Descriptions
Entain Kiosk Component Descriptions 15.6” LCD Screen Magswipe NFC (side) Printer NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15502-ML002 Rev01_ECN 6481_ENTAIN QUICK START GUIDE Page 2 of 8... - Page 3 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Unpacking Entain Kiosk ATTENTION: Prior to installation, refer to Chapter 1 – Safety Information in the Entain User Service Manual. Remove the strapping from the carton. CAUTION: The strapping is under tension and can flick when cut.
- Page 4 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Power up the Entain Kiosk Power, Fuse and Network are accessed from the rear of the Kiosk. The Kiosk is intended to be used in a location having equipotential bonding (such as a restricted access area) and is connected to power using an earthed IEC cable supplied.
- Page 5 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Power up the Entain Kiosk (continued) Select Printer Loom from packaging (reference image only). Plug into USB Type A Power Plug into Printer. Opposite end of the Printer Loom has the following plugs (reference image only): •...
- Page 6 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Power up the Entain Kiosk (continued) Switch unit from O → I in position shown. Close the Back Cable Door. Loading Printer Paper For Kiosks with the Printer installed into the Kiosk Peripherical Tray: Holding the bottom of the 15.6”...
- Page 7 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Loading Printer Paper (continued) For Kiosks with the Printer installed onto the side of the Kiosk: Re-position the Printer (if required) for clear access to load the paper.
- Page 8 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. LCD Screen adjustment The view angle of the 15.6” Teller LCD Screen can be adjusted in an up and down direction to suit the user. Carefully hold the LCD Screen on the sides with both 15.6”...