TRENDnet TK-801R Quick Installation Manual page 8

To switch between computers, you use the front-panel push buttons or hot-key
commands.
Hot-Key Commands
A keyboard hot-key command consists of three keystrokes:
Hot-Key command = ScrLk + ScrLk + Command key(s)
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
You then have another 2 seconds to press a command key. If you do not press
a key within 2 seconds, the switch will exit hot-key mode.
Below are the "Hot-Key" commands for TK-801R or TK-1601R:
ScrLk
J
1+
ScrLk
J
+
♦
J
Previous Port
ScrLk
+
' ScrLk |
+
Next Port
NOTE:
You can also press up arrow key or down arrow key longer time
to speed up selecting the destination port
6
English