Display Group Settings - ViewSonic VS19315 User Manual

Display Group Settings

To adjust the Display Group Settings, select the Display Group icon (
the lower-right corner of the screen.
1. Toggle the "Turn On/Off Display Group" ON to enable the Display Group feature.
NOTE: Other preinstalled ViewBoard Cast devices in the same network will be
listed.
2. Select the devices you want to join the display group and select OK to save the
settings.
NOTE:
• If the devices you want to group are not listed, you can enter their
respective IP address or connecting PIN code.
• The Display Group maximum device limit is six devices.
105
) located in