Advertisement
Guideline
The 12-V battery must be fully charged before it is handed
over to the customer.
Info
The first charging process may take longer with a new
12-V battery.
–
Remove the front rider's seat. (
–
Store the tool set below the seat.
–
Remove spare key and KEYCODECARD and keep in a safe place
for the handover.
–
Remove the fuel tank cover. (
–
Install the 12-V battery. (
–
Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
–
Mount the fuel tank cover. (
V02669-01
–
Mount the front rider's seat. (
–
Refuel. (
p. 14)
–
Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
p. 7)
p. 8)
p. 11)
p. 9)
p. 8)
SETUP 2
5
Advertisement
