Searching For Digital Television Channels Through Cable Automatically - Grundig 43 VLE 4820 User Manual

DETAILED­CHANNEL­SETTINGS
Searching­for­digital­television­
channels­through­cable­
automatically
1­ Open the »Input Source« menu with »
2­ Select »DTV« using »
confirm with »OK«.
3­
Press »MENU« to open the menu.
< >
4­
Press » « or » « to select the »CHANNEL«
menu and press »OK« to confirm.
– » CHANNEL« menu is now enabled.
5­ Select »Auto Tuning« with »
confirm with »OK«.
– » Tuning Setup« menu will be displayed.
Tuning Setup
Country
Tune Type
Scan type
Scan Type
Network ID
Frequency
Symbol Rate
Back
MENU
6­ Go to »Scan Type« with »
select »DVB-C« with »
7­ Go to »Country« with »
select the country with »
« or » « and
V Λ
« or » « and
V Λ
Turkey
DTV
DVB-C
Full
Auto
Auto
Auto
Start
ENTER
« or » « and
V Λ
< >
« or » «.
« or » « and
V Λ
< >
« or » «.
­----------------------------------------------------
8­ Select »Tune Type« with »
select »DTV« with
9­
Select »Scan Type« using »
select (»Network Scan« or »Full«) with »
«.
>
or » «.
– » Network Scan« scanning function sets
the channels according to the cable
operator information in the broadcasting
signal.
– » Full« scan function scans the entire
frequency range selected. With this
search option, search can take a long
time. This search type is recommended.
Some cable providers do not support
»Quick« scan.
Note:
You can speed up the search. To do this,
7
frequency and network ID information are
required. You can obtain such information
from your cable provider or find them in
Internet forums.
10­
Press »OK« to start the search.
– T he »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– S earch may take several minutes
depending on the number of television
channels received.
Note:
The search can be aborted with »EXIT«.
7
11­
Press »EXIT« to end searching.
« or » « and
V Λ
< >
« or » «.
« or » « and
V Λ
ENGLISH
<
«
47­