Table of Contents
Advertisement
The transmission temperature
has increased
significantly due to the sporty driving manner.
Drive in a less sporty manner until the tem-
perature returns to the normal range and the
indicator light switches of.
[O] Transmission malfunction: You can con-
tinue driving
There is a system ma lfunction in the transmis-
sion. You may continue driving. Drive to your
authorized Audi dealer or qualified repair fa-
cility soon to have the malfunction corrected .
[O]
Transmission malfunction : You can con-
tinue driving with limited functionality
There is a system malfunction in the transmis-
sion . The transmission is switching to emer -
gency mode. This mode only shifts into cer-
tain gears or will no longer shift at a ll. The en-
gine may stall. Drive to your authorized Audi
dealer or qualified repair facility immediately
to have the malfunction corrected .
[O]
Iii
Transmission malfunction: No reverse
gear. You can continue driving
S t ronic transmission: There is a system mal-
function in the transmission. The transmis-
sion is switching to eme rgency mode. This
mode on ly shifts into certain gears or will no
longer shift at all. The engine may sta ll. You
cannot engage the reverse gear. Drive to your
authorized Audi dealer or qualif ied repair fa-
cility immediately to have the malfunction
corrected .
[O]
Transmission malfunction: Stop vehicle
and shift to P
Do not continue driving. Select the P selector
lever position and see your authorized Audi
dea ler or qualified repair facility for assis-
tance.
(D
Note
If the transmission switches to emergency
mode, you shou ld take the vehicle to an
author ized Audi dealersh ip as soon as pos-
sible to have the cond ition corrected.
Automatic
Transmission
113
Selector lever emergency
release
Applies to vehicles: with mu ltitronic/5 tronic/t iptro nic
If the vehicle's power supply fails, the selec-
tor lever can be released in an emergency .
Fig. 1 17
Front center console: se lector lever emergen ·
cy release
.,. To reach the emergency release mechanism,
remove the ashtray insert*.
.,. Loosen and remove the small cap in the ash-
tray mount ~
fig . 117 .
.,. You now have access to a bolt. Using a
screwdriver or similar, press the bolt down
and hold it down .
.,. Now press the interlock and move the se lec-
tor lever to the N position.
The selector lever can only be moved from the
P position if the ignition is turned on . If the
power supp ly fai ls (for example, the battery is
discharged) and the vehicle must be pushed
or towed, move the selector lever to the N po-
sition first using the emergency release.
Advertisement
Table of Contents
