Sony DVP-NC675P Operating Instructions Manual page 26

8 PressENTER.
The Setup Display lk_r selecting the type
of jack used Io connect your amplifier
(receiver) appears.
9
Press q/q, to selectthetype ofjack
(if any)you are usingto connectto
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 (O through O).
• If you connect iust a TV and nothing
else, select "NO." Quick Setup is
finished and conuectkms are complete.
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
• Select "DIGITAL OUTPUT." The Setup
Display lk)r"DOLBY DIGITAL" appears.
10Press
I'/,i, to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that nmtches the audio
connection you selected on pages 22 to
24 (_ thruugh _1_).
AUDIO SETUP
• D-PCM (page 69)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 69)
11Press ENTER.
"DTS" is selected.
AUDIO SETUP
ON
12Press
_,/,=, to select whether or
not you wish to send a DTS
signal
to your amplifier (receiver).
Choose the item that m_ches the audio
connection you selected on pages 22 to
24 (_ through _).
• OFF (page 69)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 69)
13Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
......................................................................................................... DOLBY DIGITAL
26