Sony DVP-NC675P Operating Instructions Manual page 22

0 Connectingto a stereo amplifier (receiver) and2 speakers/Connecting to
an MD deck or DATdeck
If the stere<} amplifier (receiver) has audio input jacks L and R only, use _. If the amplifier
(receiver) has a digital input j_lck, or when connecting to all MD deck or DAT deck, use _.
In this case, you can also connect the player directly to tile MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
Optical digital cord
(not supplied)
Remove jack cap
before connecting.
Stereo audio cord
(not supplied)
(white)
OPTICAL
DiGiTALOUT
to DIGITAL OUT
(OPTICAL or COAXIAL)
Coaxial digital
cord (not supplied)
or
(white)
tocoaxialoroptical _ _ @_/
digital input
[Speakers]
Stereo amplifier (receiver)
(red)
i
to LINE OUT L/R (AUDIO)
(red)
to audio input
Front (R)
MD deck/DAT deck
==z_: Signal flow
22