Preparing The Battery Pack - Sony Cyber-shot DSC-W80 Instruction Manual

1 Preparing the battery pack
0 Insert the battery pack into the battery charger.
0 Connect the battery charger to the wall outlet (wall socket),
The CHARGE lamp lights on. and charging starts.
When the CHARGE lamp turns oil charging is finished (Practical charge).
If you continue charging the battery pack lot about one more hour (until it is flllly charged), the charge
will last slightly longer.
Charging time
• Time required to charge a flllly depletcd battm T pack at a temperature of 25°C (77°F). Charging may take
longer under certain ch+cumstances or condilions,
• See page 26 lor the number of images lhal can be recorded.
• Connect the battery charger to an eusily accessible wall oul]el (wall socket) dose by.
• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from tile AC power source
(mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using tile
battc W charger, immediately shul ol| tile power by disconnecting the plug from the wall out]el (wall
socket),
• When charging is finished, disconnect the power cord (mains lead) fl+omthe wall outlet (wall socket), and
rclllove the battery pack lrom the battery charger.
• Designed lbr use with compatible Sony batteries.
10