Black & Decker BXUVXA01 Instruction Manual page 11

Disassemble Roller Cover
Press middle of the roller cover release
button to remove it.
Disassemble Roller
To remove the roller, pull up the left
handle of the roller with your fingers to
remove it.
10
Snap
Assemble Roller Cover
To assemble the roller cover, first
align the roller cover with the snap
position, press down with both
hands until it "clicks" into place.
Assemble Roller
To assemble the roller, squeeze the
roller handle with your hand, align
the right side of the roller with the
right end cover first, then put the left
end of the roller handle into the slot,
until it "clicks" into place.