Table of Contents
Advertisement
/,41
Freezing the POP picture
1. Press FREEZE while the POP is not on the screen.
The POP window will appear with a still picture.
2. Press FREEZE again to renew the still picture.
To erase the still POP window:
Press EXIT.
Still picture
Adjusting
the size of the double-window
When tile input signals of the main and POP pictures are 480i, you
can adjust the size of each window. Repeatedly press 'q or • to change
the size (in 9 steps).
Note:
Youcan adjust the sizeof the double window
for 480i signals onl_ ffyou try to adjust the
double window size when viewing another
sv_znal, the message "Not available"will
appear on the screen
ii
<
NOTICE OF POSSIBLE ADVERSE
EFFECTSON "IV PICTURETUBE
Avoid displaying stationary images on
your TVscreen for extended periods of
time, Fixed[non-moving) images [such
as still PIP/P0P windows or black/gray
bars in wide-screen picture or PIP/P0P
formats) can become permanently
engreined in the picture tube. ]his type
of damage is NOT COVERED BY
YOUR WARRANTY becauseit isthe
result of misuse. Seeitem 33 on page 4.
33
Advertisement
Table of Contents
