Table of Contents
Advertisement
Programming
the remote
control
Your Toshiba TV remote control is preprogrammed
to operate most
Toshiba devices. To program your TV remote control to operate a
non-Toshiba device or a Toshiba device that the remote control is not
preprogrammed
to operate, follow the steps below. For details on
using the remote control to operate the device, see page 18.
1. In the remote control code table (below and on the next page),
find the code for your device. If more than one code is listed, try
each one separately until you find one that works.
2. Set the Device Switch to the type of device you are programming
the remote control to operate -- CBL/SAT (for a cable converter
box or satellite receiver), VCR (for a VCR or TV/VCR combo),
or DVD (for a DVD player or HTIB [home theater in a box]).
3. While holding down RECALL, press the Channel Number
buttons to enter the 3-digit code for your device.
4. To test the code, turn on the device, point the remote control at
it, and press POWER.
• If the correct code was entered, the device will turn off.
• lfthe device does not respond, repeat steps 1 - 4 using
another code.
• If the device does not respond to another code, you will need
to use the remote control that came with the device.
Note:/n addition to POWER,confirm thatall necessarykeys on the
TVremote control operate your device,ff some keysare not
operational, repeat the device code setup using another code Cifother
codes are listed for your device). If, after trying all listed codes, the
necessarykeysde net operate your device, use the device'soriginal
remote control
5. Remember to set the Device Switch back to TV to control the TV.
6. For future reference, write down the code(s) you used:
DEVICE
CODE
DEVICE
CODE
Note:
ALL
Number
Device Switch
• Everytimeyouchangethebatteries, you
will need to reprogram the remote control
• SomenewerVCRsrespondtoeitheroftwo
codes. TheseVCRshavea switch labeled
"VCR1/VCR2."If your VCRhas thiskind of
switch and does not respond to the codes
foryour VCR brand, set the switch to the
otherposition C'VCR1 "or "VCR2") and
reprogram the remote control
16
Remote control codes
In some cases you may not be able to operate your device with the TV
remote control. Your other device may use a code that is not
recognized by the TV remote control. If this happens, you will need
to use the remote control provided with the device.
Cable box
ABC: 061,062, 063,
082, 084, 087, 091,
092, 096, 098
Archer:065, 092,097,
099
Cableview:064, 094
Century: 092
Citizen:090, 092, 097
Comec: 083, 085, 086,
088, 093, 098
Diamond: 093
Eagle:091
GE: 061,062
Gemini: 069, 070, 094
Generalinstruments:
062, 089, 096
Hamlin: 093
Hitachi: 062, 095,096
Jasco:097
Jerrold: 062, 069, 071,
082, 086, 089, 091,
O96
Magnavox:072,096
Memorex:091,092, 104
Multi Canal: 090
Novavisiom I01
Panasonic:081,083, 085
Philco: 087
Philips: 066, 067, 068,
070, 072, 073, 074,
075, 091,092
Pioneer: 076, 077
Proscam061,062
Radio Shack: 092, 097,
O99
RC?c 064, 081
Raallstic: 065
Racoton: 102
Samsung: 077, 090
Scientific Atlal_ta: 063,
078, 079, 080, 088,
098, 101,105
Sears: 095
Signature: 062
Signature 2000:096
Sprucer: 081,085
Starcom: 069, 082, 087,
096, 103, 104
Stargate: 069, 090
Sylvania: 095, I00
%leView: 090
Texscam 100
'ibcom: 071,084,
085
U. S. Electronics:087,
096, 098
United Cable: 082
Universal:065, 092,097,
099, 102, 103
Wards: 096
Satellite receiver
Alpl_astar: 0 38, 059
Chaparral: 034
DISH Network: 057
Drake: 020, 040, 044,
O46,050, 053
Echostar:018,041,051
ExpressVu:057
Fujitsu:027
GE: 008, 009, 013
General Instruments:
010, 011,012, 022,
023, 031,049
Hitachi: 033
Hughes: 033
Hughes Net-work
Systems:019
Intersat:048
Janelh 027
JVC: 017, 057
Kenwood:029
Magnavox:060
Optimus: 058
Pansat: 036, 052
Prlmestar:015, 042
Proscan:008, 009, 013
Radio Shack: 022,023,
O3O
Advertisement
Table of Contents
