Table of Contents
Advertisement
Step
3
To perform a download, click the Start button.
When the Start button is clicked the configuration data is downloaded in 6 different packets to
the unit. You can watch the Status line for messages reflecting which packet is currently being
downloaded. The packets should have names associated to them like Config and Config5.
Each packet also has a byte size associated with it. See picture below indicating currently
downloading Config Data4 packet.
4
After all 6 packets have been downloaded successfully, the following message should appear.
5
When the OK button is clicked in the display above, the following display below should appear.
The display above shows the name of the downloaded file.
To exit, click the Done button.
To view the details of a file, click the Details button.
Release 3
8/02
Action
HercuLink™ - User Manual
HercuLink
Download
25
Advertisement
Table of Contents
