Confycare JF-D39 User Manual

Confycare JF-D39 User Manual

3 function hospital bed

Advertisement

Quick Links

JF-D39
3 Function Hospital Bed
USER GUIDE

Advertisement

Table of Contents
loading

Summary of Contents for Confycare JF-D39

  • Page 1 JF-D39 3 Function Hospital Bed USER GUIDE...
  • Page 2 1. Product performance, main structure composition, working principle, work- ing conditions, applicable scope and contraindication, etc 1.1 Product structure and composition The electric hospital bed is a combined electric-driven device with a network power supply and an internal power supply. It consists of bed surface part (back board, seat board, leg board, foot board), bed frame part (front and rear headboards, left and right guardrails), lower bed frame part (lifting mechanism, central control mechanism, casters), electric control part (lifting and lowering motor, back plate motor, leg plate motor, opening and closing motor).
  • Page 3 1.3 Product function - Back lifting; - Leg lifting; - Vertical lifting; - Emergency release. 1.4 Product feature - Back angle (0-75°±2°), knee angle (0-35°±2°), leg angle (0-10°±1°), height adjustment (440mm-740mm (±50mm)), the posture of the bed is realized by electric operation, and it is equipped with indicator lights to display the execution status of the function.
  • Page 4: Installation

    - When using the guardrail, please check whether the lift is in place to avoid unnecessary danger. - When installing the headboard and foot board,please be careful to hold it firmly to avoid accidental fall of the headboard and foot board. - After the electric hospital bed is fixed, please step on the central control caster to lock the caster;...
  • Page 5 4.Operation instruction 4.1 Hand switch function description a) The indicator light is on, the hand switch is powered on and can be controlled. b) Press it again, the power is turned off, and the hand switch cannot work. Back up Back down Leg up Leg down...
  • Page 6: Troubleshooting

    4.4 Guardrail lifting If the guardrail needs to be raised, the guardrail will be automatically locked after being raised to the highest position. To lower the guardrail, please pull the guardrail switch, you can lower the guardrail (Figure 4). Figure 4 Guardrail switch 4.5 Emergency stop button The emergency stop button is installed on the patient's left hand side in the hospital bed.
  • Page 7: Cleaning And Disinfection

    CLEANING AND DISINFECTION SHUTDOWN PROCEDURE Before cleaning the hospital bed, unplug it from the Adjust the hospital bed to a suitable position to mains. Clean the hospital bed after each use. ensure that the patient is safely left, then turn off the power.
  • Page 8 JF-EMN-2022V.01...

Table of Contents