North Star Proven Performance M268197C Owner's Manual page 28

9. Adjust pressure
as nee de d
10. Ope rate spray
gun (as nee de d
for application)
Operation – Using the Sprayer
4. O perate the agitator
Begin agitation by opening the agitation valve. The agitation fluid can be
visually monitored in the clear PCV tubing.
Turn the pressure regulator until desire d pressure is achie ve d. Do not
excee d 435 PSI.
NOTE: Do not open spray gun valve at this time.
Prope r Ope ration of the Spray Gun.
1. Squeeze the trigger to begin spraying.
2. To engage the trigger lock. Squeeze the trigger and push up on the trigger
lock.
3. To disengage the trigger lock, push the trigger lock down and release the
trigger.
4. Open spray gun valve on the pump.
NOTE: It is not unusual for the operator to be exposed to chemical while
operating the spray gun—gloves should be chemical resistant.
NO TE: This spray gun has a maximum pressure rating of 200 PSI. Do not
excee d 200 PSI while using this gun. If your spraying application higher than
200 PSI, order optional high pressure tree gun #22877 separately at 1-800-270-
0810.
Trigge r Lock
Trigge r
Pre ssure Regulator
Spray Gun Valve
28
Agitation Valve