Routine Maintenance; Remove And Install Front Cover -Wallmaster - Friedrich Kuhl KCS12B10A Service Manual

Remove and Install Front Cover -Wallmaster

Remove the decorative front cover.
1. Remove the FRONT PANEL. Using the handles, pull panel out until it is released from the two retaining snaps. Place the
cover aside carefully.
2. Remove the filter by pulling it from the handles releasing it from the slots on the frame. Wash the filter with water to remove
all dust and then rinse, remove water excess and let it dry. Do not twist. Remove the intake grill by applying slight outward
pressure on the chassis removal handles and popping grill out out of slots.
3. Remove the 4 screws and remove the decorative front assembly.
Install the decorative front cover.
1. Install the front decorative assembly with 4 screws .
2. Install the filter by inserting each tab in their respective slot.
3. Install Intake grill by applying slight outward pressure on the chassis removal handle.
43

ROUTINE MAINTENANCE

ELECTRIC SHOCK HAZARD
Disconnect power to the unit before
servicing. Failure to follow this warning
could result in serious injury or death.
Filter
Intake Grill
Figure 403 (Remove and Install the Decorative Front Assembly)
WARNING
Decorative Front Assembly
Screws (4 ea)
Chassis removal
Handel