Jumpers And Connectors - Supermicro H13SRA-TF Quick Reference Manual

P c
ackage ontents
• One Supermicro Motherboard
• Four SATA Cables
• One I/O Shield

Jumpers and Connectors

Jumper
JBT1
JPAC1
JPL1
JPUSB1
JWD1
Connector
12V_PUMP_PWR1
12V_PUMP_PWR2
BMC_LAN
BT1
COM1
CPU SLOT1/4
CPU SLOT3/6
FAN1 – FAN4
FANA, FANB, FANC
JAFP1
JAUDIO1
JD1
JF1
JL1
JMCIO
JOH1
JPI2C1
JPW1
JPW2, JPW3
JSD1
JSPDIF_OUT
JSTBY1
JTPM1
JUIDB1
LAN1, LAN2
M.2-C1, M.2-C2
SATA0 – SATA3
SP1
USB0/1
USB2/3
USB4, USB5, USB6, USB7
USB8
USB9
VGA
• One Quick Reference Guide
Description
Clear CMOS (Onboard)
HD Audio Enable/Disable
LAN1/LAN2 Enable/Disable
USB4/5 Wake Up
Watchdog Function Enable
Connectors
12 V 4-pin Power Connector (for CPU liquid cooling pump)
12 V 4-pin Power Connector (for GPU liquid cooling pump)
Dedicated BMC LAN Port (RJ45)
Onboard Battery
Back Panel COM Port
PCIe 5.0 x8 Slots
PCIe 5.0 x16 Slots
CPU Fan Headers
System Fan Headers
Front Panel Audio Header
Back Panel High Definition Audio Ports
Speaker/Buzzer Header
Front Control Panel Header
Chassis Intrusion Header
PCIe 4.0 x8 MCIO Connector with support of two NVMe 2.5" SSDs (NOT hot-swappable, supported by
TRX50)
Overheat LED Header
Power Supply SMBus I C Header
2
24-pin ATX Main Power Connector (Required)
12 V 8-pin CPU Power Connectors (Required)
SATA Disk-On-Module (DOM) Power Connector
Sony/Philips Digital Interface (S/PDIF) Out Header
Standby Power Header (5 V)
Trusted Platform Module (TPM)/Port 80 Header
Unit Identifier (UID) Switch / BMC Reset Button
RJ45 1 GbE LAN Ports (H13SRA-F only); RJ45 10 GbE LAN Ports (H13SRA-TF only)
PCIe 4.0 x4 M.2 M-key Slots (Support 22110/2280 form factors and RAID 0/1)
SATA 3.0 Ports (6 Gb/second, support RAID 0/1/5/10)
Internal Speaker/Buzzer
Front Access USB 2.0 Header
Front Access USB 3.2 Gen. 1 Header (5 Gb, Type-A)
Back Panel USB 3.2 Gen. 2 Ports (10 Gb, Type-A)
Front Access USB 3.2 Gen. 2 Header (10 Gb, Type-C)
Back Panel USB 3.2 Gen. 2x2 Port (20 Gb, Type-C)
VGA Port supported by BMC
Jumpers
Description
Default Setting
Short Pads to Clear CMOS
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)