Jumpers And Connectors - Supermicro C7Z270-CG-L Quick Reference Manual

P c
ackage ontents
• One (1) Supermicro Motherboard
• Four (4) SATA Cables, One (1) I/O Shield
• One (1) Quick Reference, One (1) Driver CD

Jumpers and Connectors

Jumper
CLEAR CMOS Clear CMOS Button
JBR1 BIOS Recovery
JBT1 Clear CMOS (on board)
JI2C1/JI2C2 SMB to PCI-E Slots
JPME2 Intel
JPUSB1 USB Wake Up Enable (Back Panel USB
0/1)
JWD1 Watch Dog Function Enable
POWER BUTTON Internal Power Button
RESET BUTTON Onboard System Reset Button
Connector
AUDIO FP
BT1
COM1
CPU_FAN1/FAN2
I-SATA0~5
JD1
JF1
JL1
JPW1
JPW2
JSD1
JSPDIF_OUT
JSTBY1
JTPM1
PCI-E M.2 CONNECTOR 1, 2
USB 2/3, USB 4/5
USB 12/13 (3.0)
SYS_FAN1/FAN2/FAN3
TH1
All manuals and user guides at all-guides.com
Jumpers
Description
Manufacturing Mode
®
Connectors
Front Panel Audio Header
Onboard Battery
COM1 Port Header
CPU Fan Headers
(Intel Z270) Serial ATA (SATA) 3.0 Ports 0~5 (6Gb/sec)
®
Pins 1~4: External Speaker
Front Panel Control Header
Chassis Intrusion Header
24-pin ATX Main Power Connector (Required)
8-pin CPU power Connector (Required)
SATA DOM (Disk On Module) Power Connector
Sony/Philips Digital Interface (S/PDIF) Out Header
Standby Power Header
Trusted Platform Module (TPM) Header
PCI-E M.2 Connectors 1 and 2, small form factor devices
and other portable devices for High speed NVMe SSDs
Front Panel Accessible USB 2.0 Headers
Front Panel Accessible USB 3.0 Header
System Fan Headers
2-pin Thermal Sensor Header
Default
Push Button Switch
1-2: Normal
Short pads to clear CMOS
On: Enable
1-2: Normal
1-2: Enable
1-2: RST
Push Button Switch
Push Button Switch
Description