Suzuki GSXR-1100 1990 Service Manual page 304

10-23 GSX•RIIDDM 1'91-II00El)
REASSEMBLY AND REMOUNTING
Reassemble and remount the front fork In the reverse o rder
or
removal and disassembly. Pey auention to the following points:
DAMPER ROO BOLT
lnsen the fnner rod/ damper rod tcartrldge) lnto the Inner tube
and tighten the damper rod bolt to the specified torque with
the special tool and hexagon w rench.
CAUTION:
Use • new da mper rod bolt gasket to prevent oil leekege.
Dumper rod bolt : 34 - 46 N•m
13.4 - 4.8 k g•m, 24.5 - 33.5 lb-ft)
09940-64821 : Front fork anembling tool
09940•54830 : Attochment
09900-00401 : "L" type hexagon wrench set
TUBE METALS AND SEALS
• Hold the inner tube vertically and clean the metal groove a nd
inslall the ANTI-FRICTION meta l by hand as shown.
CAUTION:
Use special care to prevent damage to the "TEFLON" coated
s1, 1 r-fece of the
ANTI-FRICTION metal when mounting It.
• lns1all the dust seal. oil seal stopper ring, oil seal, oU seal
retainer and enti.fric1ion metal onto 1he inner tube.
CAUTION:
• When
installing
the
dust
, eal
©
a nd oil seal @
onto the
Inner tube. protect their
aeal
lips with
a
vinyl film @ to
prevent oil
ffl l
damage.
• Do not use sotvent s for washing to prevent oil seal
damage.
<D
Oust seal
®
Oil seal stopper ring
@
on
seal
©
Oil seal
r etainer
@
Anti.
friction metal
(outer
tub.el
@
Anti-friction metal (Inner tube)
• 1 nsen Ihe inner tube into the outer tube andlnstall 1he oil seal
and
dust seal
wilh the special tool.
0994-0-62820 : Front fork oil seal installer