Suzuki GSXR-1100 1990 Service Manual page 303

9. Separate lhe outer lube from the inner tube.
NOTE :
Be careful not to damege rhe Inner rube.
CAUTION:
The ou1t r tube and inner tube " ANTI-FRICTION" metals
must be replaced along with the oil seal and dus·t seal. when
assembling the front fork.
10. While holding the caliper mounting portion © by vise and
remove the damper rod bolt with the special toot and
hexagon w rench.
09940-54821 : Front fork d isassembling tool
0994().54830 : Atl&chment
09900.00401 : "L" type hexagon wrench set
1
1.
Remove the Inner rod/ damper rod (cartridge) out of the
inner tube.
CAUTION:
Do not attempt to disassemble the Inner rod/damper rod.
INSPECTION
INNER A ND OUTER TUBE
Inspect the Inner tube sliding surface and outer tube sliding
surface tor any scuffing.
FORK SPRING
Measure the for k spring free length.
If i t
is shorter than the
service limh, replace it with a now one,
Service limit: 277 mm (10.9 In)
GSX•RIIOOM l"Sl•MOOELI 111-22
It
!I
lnnn 100