Electrical Adjustments - Sony HVL-F60M Service Manual

PREPARATIONS
1. Adjusting Items when Replacing the Parts
When replacing the following part or performing the disassembly/
assembly, perform the check/adjustment according to applicable
parts.
When replacing the COMPLETE H BOARD:
2 Charging voltage adjustment, Charging completion display
lighting voltage/Charging stop voltage check
When replacing the RADIATION BLOCK ASSY (RAB1):
2 Charging voltage adjustment, Charging completion display
lighting voltage/Charging stop voltage check
3 Zoom home position adjustment
4 Flash power level check/adjustment
5 Flat fl ash intensity check/adjustment
When replacing the COMPLETE A BOARD:
2 Charging voltage adjustment, Charging completion display
lighting voltage/Charging stop voltage check
3 Zoom home position adjustment
4 Flash power level check/adjustment
5 Flat fl ash intensity check/adjustment
2. List of Service Tools and Equipment
• DC power supply (Fig. 1)
• Digital multimeter (Fig. 2)
• Power supply adaptor (Part No. J-6082-602-A) (Fig. 3)
(Note 3)
• Flash meter (commercially available) (Fig. 4)
• Camera (Model corresponding to this unit)
• Conversion adaptor (1-843-476-11)
(Shoe adaptor (ADP-AMA) (Accessories of this unit)) (Fig. 5)
• AE master lens (Part No. J-6082-597-A) (Fig. 6)
• Tripod (Fig. 7)
• Compact Flash (CF) Card (For image saving) (Fig. 8)
• Back ground paper (Part No. J-2501-130-A) (Fig. 9)
• Tape measure (Fig. 10)
• Personal computer (Fig. 11) (Note 2)
• Color Calculator 2 (Note 1)
SECTION 3

ELECTRICAL ADJUSTMENTS

Note 1: Color Calculator 2 is downloadable from the TISS homepage.
Note 2: Personal computer
Note 3: Attach the power supply adaptor as shown in the following fi gure.
Fig. 1 Fig. 2
Fig. 4 Fig. 5
Fig. 7 Fig. 8
Fig. 10 Fig. 11
(Color Calculator 2 installed)
OS : Windows2000 Professional/XP
Memory : 40 M Byte or more recommended
Hard disk free area : 15 M Byte or more recommended
USB terminal : Standard equipment
Graphics : 32,000 colors or more recommended
VGA monitor
Connect to the negative
polarity terminal.
Connect to the positive
polarity terminal.
Connect the IC clip,
avoiding the plastic cover.
HVL-F60M
Fig. 3
Fig. 6
Fig. 9
power supply adaptor
17