HVL-F60M
2-12. MAIN A ASSY BLOCK
Note: When installing the main A assy
block, align the slit with the boss.
– Left side –
2-13. MAIN D ASSY
8 silicon washer
4 Peel the main body rubber.
2 tapping screw
8 silicon washer
7 Draw out harness.
1 bounce rubber
Note: When installing the bounce rubber,
install not to be twisted.
12
1 two tapping screws
(M2
4.5)
3 two tapping screws
(M2
4.5)
(M1.4
3)
5 claw
– Front top side view –
2 main A assy block
1 two tapping
screws
(M2
4 Peel the main body rubber.
9 main D assy
2 tapping screw
(M1.4
3)
6 Remove the main D assy in
the direction of an arrow.
5 claw
Note: When installing the main A assy
block, align the slit with the boss.
4.5)
– Right side –
2 two tapping screws
(M1.4
3)
1 bounce rubber
Note: When installing the bounce rubber,
install not to be twisted.