Battery Installation - Hitachi 46F510 Operating Manual

iiiiiiiiiiiiiiiiiiiiiiiiiiill
iiiiiiiiiiiiiiiiiiiiiiiiiiill
iiiiiiiiiiiiiiiiiiiiiiiiiiill
iiiiiiiiiiiiiiii
iiiiiiiiiiii !;!ii 711
iiiiiiiiiiii i! i!ili i!ii!
Check to make sure you have the following accessories before disposing of the packing material.
PARTNAME
REMOTE CONTROL
CLU-4328UG
PAT_T NO. ILLUSTRATION
r ..................
w CtU_AT #V#NCR !
<_4zb<_ C%>
C2_ C_ > C0-_
_ _ _'_
'\ \ HITACHI /
HL01838
2.
1, Remote Control Unit is either CLU:4328UG (Part No, HL01838),
2, Two "AA" size, 1,5V batteries (For Remote Control Unit),
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
1, Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the
cover off,
2, Insert two new "AA" size batteries for the remote control, When replacing old batteries, push them towards the springs
and lift them out,
3, Match the batteries to the (÷) and (o) marks in the battery compartment,
4, Replace the cover,
BOTTOM VIEW
Lift up on tab to
remove back cever
OAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.