Troubleshooting From The Error Codes - Epson EH-TW8000 Service Manual

EH-TW8000/TW9000/TW9000W

2.4.3 Troubleshooting from the Error Codes

If the projection does not start for some reasons, connect your
PC to the service terminal so as to display the AS menu and
check the error code. To display the AS Menu, see the following:
"4.1 AS (After Service) Menu (p121)"
This section explains the troubleshooting from the error codes displayed on the AS
(after service) Menu to carry out their necessary repair.
Display the AS Menu and switch it to the Error Log window to check the error code,
and locate its remedy from the table below and carry it out.
Check the Error Code in the error log
Locate the defective parts referring to the
table below with the Error Code.
Repair/replace the defective parts.
Figure 2-8. Flowchart of Troubleshooting
SEIKO EPSON
Start
from AS menu.
Troubleshooting
37
CONFIDENTIAL
Revision A