Power Supply (Assembly) - Epson EH-TW8000 Service Manual

EH-TW8000/TW9000/TW9000W

3.3.17 Power Supply (assembly)

Standard Operation Time 20 Min.
1. Remove the Air Filter. (p.64)
2. Remove the Lamp. (p.64)
3. Remove the Rear Case. (p.66)
4. Remove the Front Case. (p.67)
5. Remove the Upper Case. (p.68)
6. Remove the MA Board (assembly).
7. Remove the Lens Shutter. (p.77)
8. Remove the Optical Engine (assembly).
9. Remove the five screws ( )( )( ).
10. Disconnect the BA Cable from the Ballast (assembly).
11. Disconnect the AC Cable from the Power Supply (assembly), and remove the
Power Supply (assembly).
SEIKO EPSON
Disassembly and Assembly
(p.70)
(p.78)
BA Cable
Ballast (assembly)
103
CONFIDENTIAL
Power Supply (assembly)
AC Cable
C.B.P-TITE SCREW,3X10,F/ZB-3C
C.P.(O)SCREW,4X6,F/NI
C.C.SCREW,3X4,F/ZN-3C
Figure 3-37.
Revision A