Table of Contents
Advertisement
EH-TW8000/TW9000/TW9000W
3.3.16 Front Foot
Standard Operation Time
23 Min.
1.
Remove the Air Filter.
(p.64)
2.
Remove the Lamp.
(p.64)
3.
Remove the Rear Case.
(p.66)
4.
Remove the Front Case.
(p.67)
5.
Remove the Upper Case.
(p.68)
6.
Remove the MA Board (assembly).
7.
Remove the Lens Shutter.
(p.77)
8.
Remove the Optical Engine (assembly).
9.
Remove the INT Duct (assembly).
10. Remove the EX Duct (assembly).
Make sure to use needlenose pliers or a nipper when removing the Push Nut in
the following steps. Removing and attaching the Push Nut repeatedly may cause
the deformation of the Push Nut.
11. Remove the Push Nut using needlenose pliers or a nipper.
12. Turn the Front Foot counterclockwise and remove it.
13. Remove the Foot Rubber from the Front Foot.
SEIKO EPSON
(p.70)
(p.78)
(p.87)
(p.92)
Disassembly and Assembly
Push Nut
102
Foot Rubber
Front Foot
Figure 3-36.
CONFIDENTIAL
Revision A
Advertisement
Table of Contents
Troubleshooting
