Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION INSTRUCTIONS
Connecting venting
1
Remove the two screws (items A, to the right)
securing the dryer front access panel to the
dryer cabinet. Lift the panel until the tabs can be
disengaged from the cabinet, remove the panel
and set aside.
2
Connect the exhaust duct to the outside exhaust
system. Use of a 4" (10.2 cm) clamp (item B, to
the right) is recommended to connect the dryer
to the exhaust vent system. Use metal foil tape to
seal all other joints.
Reinstall the dryer front access panel.
4
Carefully slide the laundry center to its final
position. Recheck for level and rock corners for
stability.
18
Advertisement
Table of Contents
