Sony DVP-NC655P Operating Instructions Manual page 26

7
Press'l'/,l, toselect thesettingthat
matchesyourTV type.
• If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 69)
• If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 69)
8 Press ENTER.
The Setup Display lbr selecting 1he type
of video signal appears.
SCREEN SETUP
9
PressI,/,1, to selectthe typeof
signals you wish to outputto your
TV.
Select "PROGRESSIVE" only if you
have made video connection G (page 18)
and wish to view progressive video
signals.
• If you have an Interlace format TV
(standard TV)
• INTERLACE (page 69)
• If you have a Progressive format TV
• PROGRESSIVE (page 69)
lOPress ENTER.
The Setup Display lbr selecting 1he type
of jack used to connect your amplifier
(receiver) appears.
connectto an amplifier (receiver),
then press ENTER.
Choose _he item 1hat matches the audio
connection you selected on pages 21 to
24 (O |hrough 0)-
O
• if you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
oo
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
000
• Select "DIG1TAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
2Press
÷/+ to select the type of
Dolby Digital signal you wish to
send to youramplifier (receiver).
Choose the signal that m3tches the audio
connection you selected on pages 22 to
24 (10 through O)"
0O
• D-PCM (page 73)
O
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolhy Digital
decoder) (page 73)
13Press
ENTER.
"DTS" is selected.
11
PressI'/4, to selectthe typeof
jack (if any) you are usingto
26