About Your Wd Drive; Led Indicators; Power/Activity Led Behavior; Capacity Gauge - Western Digital My Passport WDMS2500 User Manual

About Your WD Drive

2
Features
Cover slides to the left

LED Indicators

The power/activity and capacity gauge indicators are represented by four LEDs
underneath the sliding port cover as shown above. Only one LED illuminates at a time
corresponding to drive capacity used.

Power/Activity LED Behavior

Appearance
Steady
Slow flashing
Alternating left to right then right to left

Capacity Gauge

The capacity gauge is enabled only through installation of WD Drive Manager, which
must be installed on each system to which My Passport is connected. The capacity
gauge is updated automatically upon drive usage.
The capacity gauge consists of four sections which illuminate left to right to indicate
space used on the drive during power-on state. Each section represents
approximately 25 percent of drive capacity. Because this drive is preformatted and
contains software and utilities, the first section is illuminated upon installation.
0-24 percent
USB 2.0
FireWire 400
Drive State
Power-on state or power-save mode
Drive standby
Drive in use
Storage Used
25-49 percent
MY PASSPORT STUDIO PORTABLE HARD DRIVE
LEDs
50-74 percent
ABOUT YOUR WD DRIVE – 3
USER MANUAL
75-100 percent