Macro-Tech MA-3600VZ Power Amplifier
6 Specifications
Performance (continued)
Output Impedance
Load Impedance (Note: Safe with all types of loads)
Stereo
Bridge Mono
Parallel Mono
Voltage Gain (8-ohm load, rated output at 1 kHz, maximum level setting)
0.775V sensitivity
1.4V sensitivity
26 dB sensitivity
Required AC Mains
Power Draw at Idle
Construction
Cooling
Dimensions
Width
Height
Depth (behind mounting surface)
Weight
Center of gravity is 6 inches (15.2 cm) behind the front mounting surface.
120 VAC, 60 Hz Units
Net
Shipping
100 VAC, International Units
Net
Shipping
120 VAC, International Units
Net
Shipping
230 VAC, International Units
Net
Shipping
Operation Manual
See Figure 6.5
2-8 ohms
4-8 ohms
1-2 ohms
124.6:1 ±6% or 41.9 dB ±0.5 dB
69.2:1 ± 6% or 36.8 dB ±0.5 dB
20:1 ±6% or 26 dB ±0.5 dB
50/60 Hz; 100-, 120-, and 230 - VAC (±10%) units are avail-
able. 230 VAC, 50/60 Hz units can be used with 220 and 240
VAC. 100 and 120 VAC units can draw up to 30 amps; 230
VAC units can draw up to 15 amps. Current, voltage and fre-
quency requirements are provided on the unit's back panel.
90 watts or less
Internal heat sinks with forced-air cooling for rapid, uniform
heat dissipation
EIA Standard 19-inch rack mount (EIA RS-310-B)
3.5 inch (8.9 cm)
16 inch (40.6 cm)
55 pounds, 1.5 ounces (25.0 kg)
63 pounds, 10 ounces (28.9 kg)
54 pounds, 5 ounces (24.7 kg)
63 pounds, 0.5 ounces (28.6 kg)
55 pounds, 1.5 ounces (25.0 kg)
63 pounds, 10 ounces (28.9 kg)
53 pounds, 6 ounces (24.2 kg)
61 pounds, 15 ounces (28.1 kg)
page 17