KitchenAid KUDM220T Use And Care Manual page 21

OPTION B
Upper Panel:
1. Disconnect electrical power supply.
2. Pull door open. Remove the two screws
(A) on each side of the dishwasher door
that secure the upper panel assembly.
3. Close door while holding upper panel in
place. Pull out lower edge of panel until
top edge of panel drops down.
4. Place panel assembly on a smooth, flat
surface and remove three screws (B)
from either side of panel to remove the
trim strip (C).
5. Slide the color panel out. Handle
carefully so the panel will not be
scratched or bent. Turn the panel to the
desired color. Place the color panel in
position then push the filler panel in
behind it.
6. Replace the trim strip and the three
screws.
7. With hands placed at sides of panel
assembly, slide the top edge of the panel
up into position under the control panel
(see illustration to the right).
8. Hold the panel in place and open the
door.
9. Hold panel assembly in position with
one hand. Replace the two screws (A) on
each side of the dishwasher door that
secure the panel assembly.
10. Reconnect electrical power supply.
21