Watchguard Firebox X1250E Hardware Manual page 29

Using the LCD Interface
LCD keypad button control
There are four buttons to the right of the LCD display.
Left Button
Right Button
Up Button
Down Button
Hardware Guide
default IP addresses. If you want to reconfigure a
Firebox with the Quick Setup Wizard, the license files
and certificates are saved when you put the Firebox
into safe mode.
To put a Firebox into safe mode, press the down arrow
on the Firebox front panel during device bootup. Keep
the button depressed until you see the words
"WatchGuard Technologies. " When the Firebox is in
safe mode, the LCD display shows the model number
of the Firebox followed by the word "Safe. "
This button is the "selection" button. It does the work
of a computer mouse "left-click" button and lets you
select from different options.
Use this button to select fields in the LCD display. It
does the work of the TAB key in a Windows dialog box.
This button lets you increase the value of a selected
item, or move up in a group of menu entries.
This button lets you decrease the value of a selected
item, or move down in a group of menu entries.
11