Watchguard Firebox X1250E Hardware Manual page 28

Expansion Slot
Fans
Power Switch
AC Receptacle
Using the LCD Interface
You can use the LCD interface and buttons for different opera-
tions.
The WatchGuard Firebox can operate in two modes:
Default Mode
Safe Mode
10
An upgrade expansion card can be installed in the
future.
The three fans decrease the internal temperature of
the Firebox.
Turns the Firebox on or off.
Accepts the detachable AC power cord supplied with
the Firebox. The power supply for the Firebox is a
WatchGuard standard auto-sensing AC power supply.
The Firebox normal operating mode, with the Firebox
booting from the Fireware appliance software and
operating with the rules set in the configuration file
you have saved to the Firebox.
In Safe Mode, you can get access to a Firebox when all
access to the Firebox is lost. You can also use Safe
Mode to reset Firebox passphrases when you do not
know or have forgotten them. To recover the Firebox
while started from Safe Mode, you must use the Quick
Setup Wizard or the Web Quick Setup Wizard.
You must put a Firebox into safe mode to use the
Quick Setup Wizard. In safe mode, the Firebox is
running Fireware and is configured with factory-
Hardware Guide