Trouble-shooting
Problem
The water tap leakage.
The display shows F2.
Common occurrence
Problem
- Stop spinning before complete the cycle.
- Selected spin program, but it doesn't
works.
- Water in the drain hose when unpack.
- Operation stops before completing wash
cycle.
- Washing machine resume its operating
after power supply back to normal.
Possible causes
Is the water inlet hose loose?
Indicates water has reached
a critical level.
- Uneven load distribution
- The water will drain out first before
spinning cycle starts.
- Residue from the performance inspection
that done by factory.
- The appliance detected low water level,
will add water automatically to the ideal
level before resume the operation.
- Once the power supply back to normal/
power plug insert properly to the socket, the
machine will resume the washing cycle
without reset program.
17
What to do
Fasten the inlet hose.
Please contact Customer
Care.
Cause